HUATAI CEREALS AND OILS MACHINERY
Home > Products > Palm Oil Refining Plant > Degumming & Deacidification

Degumming & Deacidification

ONLINE  CHAT ONLINE  CHAT

Palm Oil Refining Degumming and Deacidification Section Introduction:

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 ℃ higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95℃ by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the wastewater is discharged to the sewage treatment station.

palm_oil_degumming_and_deacidification

Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90℃ should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.

Palm Oil Refining Degumming and Deacidification Section Introduction:

Washing: there is still about 500ppm soap in the neutralized oil from the separator. To remove the remaining soap, add into the oil about 5~8% hot water, with water temperature 3~5 ℃ higher than the oil generally. To achieve more stable washing effect, add phosphoric acid or citric acid when washing. The re-mixed oil and water in the mixer is heated to 90-95℃ by the heater, and then enters the wash separator to separate the remaining soap and most water. The water with soap and oil enters into oil separator to separate out oil in the water. Further catch the oil outside, and the wastewater is discharged to the sewage treatment station.

palm_oil_degumming_and_deacidification

Vacuum drying stage: there is still moisture in the oil from the wash separator, and the moisture will affect the stability of the oil. So the oil at 90℃ should be sent to vacuum drier to remove the moisture, and then the dehydrated oil goes to the decoloring process. Finally, pump out the dry oil by canned pump.

Deodorization Section
Decolorizing Section
Degumming & Deacidification
Palm Kernel Oil Refining
Email: info01@cnoilmachine.com Skype: huatai-sales01
Tel: +86-371-86236366 Phone:+86 18317721166 Fax: +86-371-86236366
Add: Xiangjiang Road,Industry Zone,Hua County Henan Province ,China International Department and R&D Center (Zhengzhou)
Add: F6 Building 26#, No.1 Cuizhu Street High-tech Zone, Zhengzhou, 450000 He nan Province, China